Roto-Vac Gen II

Measurements Available:

OK Clamps

Rotary Vacuum Chuck

Yes, it’s true! A vacuum system for your lathe or rotary table which provides on option for those applications that cannot be held by traditional methods. Although initially designed for thin materials and composites, we discovered we could machine more aggressively than anticipated with use of our newly designed vacuum grippers. These grippers will leave indentation on backside of workpiece, however increase the lateral load in some cases by more than 400%! Grippers can be raised/lowered/relocated as needed in the 32 M6 threaded holes on the face to include the ability to easily change the size of vacuum chamber by removing/reinstalling the gasket material from one of the 9 grooves. Always selecting the largest diameter possible for your application.

Manufactured from a solid billet ensures concentricity between the shaft and vacuum chambers, increased rigidity and the extra material needed if custom modification is required. For example: reducing the size of face plate or shaft diameter as well as machining mirror image of workpiece into faceplate for custom applications.

Rotary push to connect fitting designed for 1,100 RPM, however general machining practices and common sense must be considered when using this product. Recommended for light duty machining application – please contact us with any questions. Fittings are for 5/16 or 8mm tubing. If using on lathe, steel tubing is necessary with a coolant trap placed between vacuum pump and vacuum chuck. Flex tubing may be used on rotary table although steel tubing is always the preferred method.

Part No. Description Diameter Thickness
46400 Rotary Vacuum Plate with M6 tapped holes 9.85″ 1.0″
46450 Rotary Sacrificial Plate 9.85″ .375″
46455 CAD 8mm Rotary fitting
45155 M6 Vacuum Grippers
(4/pk, includes 2mm Hex Key)
45111 Vacuum Gasket (black) sold by foot .170″
46401 Rotary Vacuum Kit (includes Vacuum Chuck, Rotary Fitting, 4 vacuum Grippers, 2mm Hex Key, Tubing and Gasket)

PATENT PENDING

Applications

Have a technical question about our products? Ask our engineers!

    Due to the wide assortment of solutions we provide, we suggest a quick call or email to one of our Engineers, or schedule a visit with one of our Manufacturer's Reps to ensure you optimize your design.

    Name (required)

    Email (required)

    Question (Please include Product and Part Number)

    Social media & sharing icons powered by UltimatelySocial
    Facebook
    Twitter
    YouTube
    INSTAGRAM